It's important for the wheelchair to be fitted properly and be as narrow as possible while maintaining comfort and safety.
This will insure the best performance for navigating tight areas both inside the home as well out in public spaces.
A wheelchair that is too narrow or too wide can cause discomfort. When too narrow, a wheelchair can become restrictive and increase the likelihood of pressure sores, while when it's too wide, becomes more difficult to push due to the angle of the arms from the shoulders to the wheels.
To determine the necessary seat width, measure the rider's widest area of the body and add one inch. This will allow for optimum seat width while maintaining ideal usability, comfort and safety.
Less
Please select another option
Please select another option
Learn More
Seat height also known as seat-to-floor height is measured from the front of the seat to the floor.
To determine the appropriate seat height, measure from the bend of the knee to the bottom of the foot. Subtract the height of the seat cushion if one is being used. If the wheelchair is not being self propelled by the feet, also add about 2 inches to allow for foot clearance.
Make sure you'll be positioned correctly in your wheelchair and can sit at your desk or kitchen table. Standard tables/counters have a knee clearance of 27 inches.
Rear wheels are critical to the performance of a wheelchair.
There are typically three types of tires:
1. Pneumatic (air-filled) tires provide a softer ride, but need to be kept inflated. Because pneumatic tires are softer than urethane tires, they are harder to push, with more resistance to the shoulders.
2. Pneumatic Flat Free (foam-filled) tires provide a stiffer ride compared to air-filled tires, and will never go flat.
3. Urethane (solid, flat-free) tires provide the quickest and stiffest ride. And they will not go flat.
Tire Tread also affects the wheelchair ride. Tires with very little tread offer a quicker ride and turn more easily because there is less rubber in contact with the ground, causing less friction. "Knobby" tires with deep treads are helpful on unpaved and rougher surfaces, yet offer less maneuverability. A 1 3/8" treaded tire is a good basic tread for everyday use.
While not all footrest options are available on all chairs, there are three typical styles of leg/foot rests:
1. Swing-away, Removable Foot Rests swing aside to allow easy access in and out of the chair as well as unobstructed use with tables and desks. Removable footrests also help to make the wheelchair more manageable when traveling.
2. Elevating Leg Rests are used when better circulation is needed or there is limited mobility in the leg. They raise the foot, straightening the leg. A calf pad is usually included.
3. Fixed Riggings are attached to the wheelchair frame and are not collapsible or removable, but the height of the footplate can be adjusted to the proper fitting.
For optimum comfort and safety, leg rests should provide a proper foundation for the legs and feet. The bottom thigh area should be fully supported by the seat while the soles of the feet are supported by the foot rests.
Discomfort, stress and poor posture can be caused when the legs and feet are left hanging without the support they need or when the foot rests are too high. Poorly fitted leg rests can have a destablizing effect on the chair, making it more difficult to push and navigate due to improper weight distribution.
Removable and fixed footrests are available at different angles depending on the users needs. A lesser angle allows the feet to extend further in front of the wheelchair for people who do not bend well at the knees. It also allows the heels of the feet to avoid the wheels when using larger diameter casters. A higher angle will bring the feet closer to your body and the wheelchair, shortening the overall wheelbase, allowing the wheelchair to turn in tighter spaces.
Armrests are mostly a matter of personal choice, but most often users without much mobility appreciate armrests to help alleviate shoulder and back stress. Armrests also provide additional stability for users with limited upper body balance and are helpful when navigating in and out of the wheelchair. Additionally, armrests allow users the ability to do pushups, helping relieve pressure as well as protecting clothing from the wheels.
When armrests are not fitted properly the wheelchair can become more difficult to push. Not all armrests are adjustable. Height should be fitted to allow the forearm to rest fully on the armrest without pushing up on the shoulders. For users who sit at a table or desk, swing-away armrest can beneficial.
There are four basic types of armrests: 1. Full length, fixed height (entire armrest is padded with a non-adjustable height)
2. Full length, adjustable height (entire armrest is padded with various height seetings)
3. Desk length, fixed height (partial armrest is padded for easier access with tables,
non-adjustable height)
4. Desk length, adjustable height (partial armrest is padded for easier access with tables,
various height seetings)
Armrest that can be easily removed or flip up and down gives users the choice of when to use the armrests.
The Quickie M6 wheelchair is a Bariatric wheelchair with a weight capacity of 650 lbs. The Quickie M6 is modeled from the design of the Quickie 2. It is made of high strength steel and weighs approximately 53 pounds, 26" x 20" with pneumatics and hangers.
Features
Desk-length adjustable height removable armrests
Folding Frame. Easy Storage and Transport.
Modular Frame Construction. Interchangeable Frame Components Allow you to Grow and Change the Chairs Width and Depth
Custom Frame Specifications. Maximum Option Choices Allow Chair to be Built to the Individual's Specifications
Folding "Lockout" Cross-Brace. Cross-Brace Locks to Limit Flex in the Frame for More Efficient Propelling
Double Cross-Brace. Allows More Strength for Higher Than Normal Weight Capacity
Adjustable Back Height. Provides for optimal Positioning of Backrest for Stability and Scapular Movement
Stabilizer Bar Locks out Back Frame to Minimize Flex for More Efficient Ride
Multiple Footplates Provide optimal Positioning of lower Extremities
Quick-Release Axle Provides Quick Removal of rear Wheels for Portability
Adjustable Axle Plate Adjustments Provide improved Stability and Propulsion of the Chair. Allows Minimal Center of Gravity Adjustment for more Efficient Ride. Also Makes it Possible to Adjust the Rear Frame Height when its Necessary to Change the Caster Wheels
If you are not 100% satisfied with your product, we offer a 30-day refund with a 10% -15% restocking fee for most items (see below). To qualify for a return please note the following:
Product must be clean, unused and in its original packaging.
Return shipping costs are the responsibility of the customer
Items must be returned within 30 days
You must have a return authorization number to qualify for a return: Please call us at 1-800-233-8110 Monday - Friday 9am to 5pm EST to obtain a return authorization number and a return address. Returns may not be sent to our corporate address
Please note
All transactions are in Canadian Dollars
Next to the price of every product it is stated if it ships from Canada or the USA
A REFUSED delivery is considered a RETURN, and the appropriate return policy applies
Items Shipping from Canada
10% Restocking Fee
There is a 10% restocking fee on all:
Transport chairs
Standard manual wheelchairs
Light weight manual wheelchairs
Folding ultralightweight wheelchairs* (except for the 9000, etc)
Open Box Specials are new products that were ordered incorrectly or may have slight imperfections. These Specials are non-returnable and do not include any in-home service.
Refused Deliveries/Packages
If packages are refused at the point of delivery, you will be responsible for the return shipping.
With the Armrest Pocket you no longer need to bend over or extend your arms to reach important items.
This pocket easily attaches to the arm of your wheelchair and offers that extra bit of storage space that is always so helpful. You'll now have a convenient and accessible place to keep your wallet, keys, cell phone and personal items when you are on the go.
Dimension: 11" x 3" x 3"
1800Wheelchair Large Wheelchair Bag
The 1800Wheelchair large wheelchair bag offers functional styling, ample storage and quick access to all your stuff.
Setup is easy: simply slide the top bag straps over back push handles and tighten. We've included some quick-release plastic clips for easy-on, easy off action. This large bag can attach to most wheelchairs and scooters. We've also included a handle on top for easy toting while not attached.
The bag offers two pockets. The larger, rear pocket includes a Velcro top to keep your belongings secure and protected. The second compartment, made of heavy duty mesh material, is open top for quick access — perfect for magazines or water bottles.
Wheelchair Rain Poncho
Our hooded pochos provide complete protection against the rainiest days. We make them from only the most durable 65/35 polycotton poplins, and they are 100% water repellent. One size fits all.
Color
Navy
Forest
Black
Liquid Caddy Drink Holder
This innovative beverage holder is designed to attach almost anywhere.
As the name implies, it will carry a variety of beverages for the thirsty
consumer. It is the first and only gimbaled and adjustable
beverage holder. Just pull and twist the bottom of the cup holder and it
will increase in length and at the same time automatically adjust its inner
diameter. Don't worry about "spillage", the gimbaled action will always
keep a beverage upright. Neoprene, inside the holder insulates any beverage
to keep it at its proper temperature.
The Liquid Caddy will attach virtually anywhere, wheelchairs, scooters,
walkers, power chairs; it is the most versatile beverage holder on the
market It comes with 4 attachments and with velcro mounts extension (included) you can attach the Liquid Caddy on up to a 4” diameter bar.
Bariatric Auto Seat Belt
ThIs Drive Bariatric Auto Seat Belt is Black and for use with all Drive and other leading manufacturers wheelchairs. It can accommodate waist sizes up to 60".
To attach this seat belt, you'll need a screwdriver.
First, you'll remove two of the screws (one each side) holding down the seat upholstery.
Next, you'll place the eyelet on the seat belt above the hole, where the screw was just sitting.
Finally, place the upholstery back where it was and reattach with a screwdriver.
Watch the video to learn how to attach a seat belt to a wheelchair
Total Chair Cushion
Turn any armchair or wheelchair into one big pillow! Complete, one piece, luxury polyfill pillow covering, for seat bottom, back, sides, and over armrests. Fabricated of Navy poly/cotton broadcloth shell with a 3" thick, breathable, hypo-allergenic poly fiberfill core.
This ideal cushion, reduces body pressure, stimulates circulation, reduces numbness, soreness and discomfort as well as reduces heat build-up by increasing air circulation and soft and Resilient polyfill is built to last.
The overall size of the cushion is 48"x42", the seat area is 16" width, however, please be aware that the side arms are pillowy, there could be a significant difference in size when it is put.
Machine Washable. MADE IN USA.
Color
Navy
White
Burgundy
Brown
Hunter
Light
Pink
Luxury Gel Wheelchair Cushion
Enhance your chair with our first designer wheelchair cushion. This dual-bladder gel cushion features a non-medical look with navy blue cover and tan piping accents and all the great internal features for your comfort and health.
Inside, the cushion has two gel bladders that help evenly disperse pressure and prevent skin breakdown. The use of two chambers of gel keep the gel from migrating allowing for even distribution. Dual-density foam layers provide a soft top entry that allows the gel to cool the skin as well as a high-density foam base layer for support and pressure distribution. The cushion includes a strap with buckle that allows one to easily carry the cushion over your shoulder as well as attach it to the wheelchair.
Supra Visco Memory Foam Back Cushion
The Kölbs Supra Visco is a general use back cushion designed to help improve the comfort of those confined to a wheelchair. At the core of the Kölbs Supra Visco is high quality sculpted foam, contoured to conform to the user’s spinal curvature.
Additionally, the ViscoBack Cushion contains a rigid insert that reduces the "hammock effect" commonly associated with sling-back wheelchairs. The cushion cover is fire retardant and removable for easy cleaning. It is also specially treated to make it moisture proof, yet it remains vapor permeable to help reduce sweating, and increase air flow. Straps on the back of the cushion allow the user to fasten it securely to the seat back.