Quickie Titanium All Court Sports Wheelchair

  • 34905
  • 154WM15
  • Sunrise Medical

Availability: Leaves USA Warehouse in 6-8 weeks

Customize & Buy

Customize & Buy

Please select another option
Please select another option
Learn More
It's important for the wheelchair to be fitted properly and be as narrow as possible while maintaining comfort and safety.

This will insure the best performance for navigating tight areas both inside the home as well out in public spaces.

A wheelchair that is too narrow or too wide can cause discomfort. When too narrow, a wheelchair can become restrictive and increase the likelihood of pressure sores, while when it's too wide, becomes more difficult to push due to the angle of the arms from the shoulders to the wheels.

To determine the necessary seat width, measure the rider's widest area of the body and add one inch. This will allow for optimum seat width while maintaining ideal usability, comfort and safety.

To determine the appropriate seat depth, measure from the back of a chair to the inside of your knee. Subtract one inch to assure no contact is made between the edge of the wheelchair seat and the inside of your leg, which could cause discomfort and prevent the rider from sitting back fully in the chair.

Less
Please select another option
Learn More

It's important for the wheelchair to be fitted properly and be as narrow as possible while maintaining comfort and safety.

This will insure the best performance for navigating tight areas both inside the home as well out in public spaces.

A wheelchair that is too narrow or too wide can cause discomfort. When too narrow, a wheelchair can become restrictive and increase the likelihood of pressure sores, while when it's too wide, becomes more difficult to push due to the angle of the arms from the shoulders to the wheels.

To determine the necessary seat width, measure the rider's widest area of the body and add one inch. This will allow for optimum seat width while maintaining ideal usability, comfort and safety.

Less
Please select another option
Learn More
Front seat height is measured from the front of the seat to the floor.
Standard seat to floor height is 19.5". Hemi height (a lower seat) is usually 17.5

 

To determine the appropriate seat height, measure from the bend of the knee to the bottom of the foot. Subtract the height of the seat cushion if one is being used. If the wheelchair is not being self propelled by the feet, also add about 2 inches to allow for foot clearance.

Less
Please select another option
Learn More

Rear seat height is measured from the back of the seat to the floor.

A chair's rear seat-to-floor height is most commonly set at a height 1" lower than the front seat height.

The rear of the seat is generally set at lower height than the front of the seat to prevent sliding forward.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Learn More
To determine a chair's back height, measure from the seat upholstery (at the seat rail) to the top of the back upholstery.Less
Please select another option
Please select another option
Learn More
While not all footrest options are available on all chairs, there are three typical styles of leg/foot rests:

1. Swing-away, Removable Foot Rests swing aside to allow easy access in and out of the chair as well as unobstructed use with tables and desks. Removable footrests also help to make the wheelchair more manageable when traveling.

2. Elevating Leg Rests are used when better circulation is needed or there is limited mobility in the leg. They raise the foot, straightening the leg. A calf pad is usually included.

3. Fixed Riggings are attached to the wheelchair frame and are not collapsible or removable, but the height of the footplate can be adjusted to the proper fitting.

For optimum comfort and safety, leg rests should provide a proper foundation for the legs and feet. The bottom thigh area should be fully supported by the seat while the soles of the feet are supported by the foot rests.

Discomfort, stress and poor posture can be caused when the legs and feet are left hanging without the support they need or when the foot rests are too high. Poorly fitted leg rests can have a destablizing effect on the chair, making it more difficult to push and navigate due to improper weight distribution.

Removable and fixed footrests are available at different angles depending on the users needs. A lesser angle allows the feet to extend further in front of the wheelchair for people who do not bend well at the knees. It also allows the heels of the feet to avoid the wheels when using larger diameter casters. A higher angle will bring the feet closer to your body and the wheelchair, shortening the overall wheelbase, allowing the wheelchair to turn in tighter spaces.

Less
Please select another option
Please select another option
Please select another option
Learn More
Easy to overlook, casters are critical to the performance of a wheelchair. Casters are the small front wheels of the wheelchair. They allow the wheelchair to steer and turn in any direction by rotating on its vertical axle.

Casters typically come in sizes from 3"" to 8"". The smaller the caster the better the maneuverability of the chair and the less likely it is to shimmy. But smaller casters on unpaved surfaces, riding in and out of elevators, or passing over street grates can be more problematic. Smaller casters are typical of chairs used for sports like basketball, which is played on an even, hard surface, yet their maneuverability makes them popular for everyday use. 3"" casters require the most riding skill and may not be the best choice for a first time wheelchair user.

The large 8", pneumatic (air-filled) caster provides the softest ride and easily rolls over bumps and raised surface, yet makes propelling the chair more difficult. Because of their size, 8"" casters can be an obstruction coming into contact with furniture or the rider's foot. Pneumatic tires need to be kept inflated with the correct pressure, and are capable of going flat.

4" to 6" casters offer a good combination of maneuverability, performance and ease of riding over surface obstructions. Composite (airless) casters offer better durability and quicker ride, while pneumatic casters provide a softer, slower experience.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Total:
CAD $4,830.00
-
+
Back

Details

Quick Overview

  • Fully adjustable and very high-strength

Description

Looking for an extra edge? The new Ti All Court® Sports Wheelchair features a titanium seat frame and a super lightweight tubing system that cuts 3 lbs. off of the overall weight of the chair.

Designed specifically for the athlete in mind, the chair comes with camber angles of 16° and 20°, providing the user with a sturdy, reliable frame that will resist tipping during the game. The All Court also provides a center-of-gravity range of 3.5" to 5" of vertical seat-squeeze adjustment. This allows users to align their weight directly over the wheels and find the optimum seat angle without making changes in fork size, casters or fork hole location.

The chair also features a single-wing bumper and offers users the optional upgrade of a 5th wheel anti-tipper, allowing players to move their weight right over the rear wheels and providing a tremendous advantage in maneuverability and power.

Features

  • Ideal for users with an athletic, fast-paced lifestyle
  • Extremely lightweight, high-strength frame
  • Center-of-mass adjustment system
  • Fully adjustable seat
  • Weight capacity of 250 lbs.
  • Single-wing bumper
  • Extra-hard caster wheels ensure chair speed and maneuverability are not simply absorbed in the wheels
  • Extreme camber options of 16° and 20° offer superior stability and effortless turning
  • Free shipping

Specifications

Product Specifications

Weight Capacity 250 lbs.
Product Weight 21.5 lbs.
Seat Width 12" - 20"
Seat Depth 10" - 20"
Seat-to-Floor Height 16" - 21"
Front Wheel Size 3" - 8"
Rear Wheel Size 24", 26"
Axle Type Quick Release
Back Height 9" - 20"
Upholstery Type Nylon
Upholstery Color Black
Warranty on Frame Two Year Limited
Shipping Weight 90 lbs.
Box Length 31"
Box Width 24"
Box Height 37"
Weight 21.5 lbs.
Front Seat Height 16″ - 21″ (1/2″ increments)
Rear Seat Height 13″ - 21″ (1/2″ increments)
Caster Size 3″
Camber 16°, 20°
Warranty Limited two-year warranty on frame and quick-release axles. One year warranty on parts and components

Returns

Return Policy

We're sorry, but we can not accept returns on this item, as it is "built to order."

See our full return policy here.

Reviews

Frame Color

Footrests

Black Utility Backpack

Kids Black/Charcoal Backpack